Liam_on_Linux (![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png)
liam_on_linux) wrote2006-12-13 12:23 am
liam_on_linux) wrote2006-12-13 12:23 am
Sorted!
I did indeed need to reconfig mdadm after building the array. This may be a difference between 6.10 and 6.06, which is what my older main server's running.
For the curious:
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 128MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 32768
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 28672 pages, LIFO batch:7
[17179569.184000] DMI not present or invalid.
[17179569.184000] ACPI: Unable to locate RSDP
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro vga=8
[17179569.184000] No local APIC present or hardware disabled
[17179569.184000] mapped APIC to ffffd000 (01101000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 334.139 MHz processor.
[ 68.089353] Using tsc for high-res timesource
[ 68.094542] Console: colour VGA+ 132x43
[ 68.096761] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 68.098689] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 68.134624] Memory: 120600k/131072k available (1829k kernel code, 9976k reserved, 1038k data, 288k init, 0k highmem)
[ 68.134717] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 68.212975] Calibrating delay using timer specific routine.. 669.13 BogoMIPS (lpj=1338277)
[ 68.213421] Security Framework v1.0.0 initialized
[ 68.213520] SELinux: Disabled at boot.
[ 68.213679] Mount-cache hash table entries: 512
[ 68.214913] CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
[ 68.214967] CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
[ 68.215164] Enabling new style K6 write allocation for 128 Mb
[ 68.215248] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
[ 68.215309] CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000
[ 68.215429] CPU: AMD-K6(tm) 3D processor stepping 0c
[ 68.215576] Checking 'hlt' instruction... OK.
[ 68.229122] SMP alternatives: switching to UP code
[ 68.229177] Freeing SMP alternatives: 0k freed
[ 68.230197] checking if image is initramfs... it is
[ 71.324006] Freeing initrd memory: 5264k freed
[ 71.327420] NET: Registered protocol family 16
[ 71.327785] EISA bus registered
[ 71.345592] PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=0
[ 71.345676] PCI: Using configuration type 1
[ 71.345726] Setting up standard PCI resources
[ 71.376374] ACPI: Interpreter disabled.
[ 71.376484] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 71.376607] pnp: PnP ACPI: disabled
[ 71.376677] PnPBIOS: Scanning system for PnP BIOS support...
[ 71.377541] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc320
[ 71.377629] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc348, dseg 0xf0000
[ 71.385976] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[ 71.386535] PCI: Probing PCI hardware
[ 71.386622] PCI: Probing PCI hardware (bus 00)
[ 71.387533] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
[ 71.387701] Boot video device is 0000:00:0d.0
[ 71.434225] NET: Registered protocol family 2
[ 71.468583] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 71.469692] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 71.470033] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 71.470218] TCP: Hash tables configured (established 4096 bind 2048)
[ 71.470293] TCP reno registered
[ 71.478087] audit: initializing netlink socket (disabled)
[ 71.478263] audit(1165968912.572:1): initialized
[ 71.479598] VFS: Disk quotas dquot_6.5.1
[ 71.479887] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 71.480607] Initializing Cryptographic API
[ 71.480723] io scheduler noop registered
[ 71.480897] io scheduler anticipatory registered
[ 71.481016] io scheduler deadline registered
[ 71.481164] io scheduler cfq registered (default)
[ 71.481304] Limiting direct PCI/PCI transfers.
[ 71.481381] Activating ISA DMA hang workarounds.
[ 71.483287] isapnp: Scanning for PnP cards...
[ 71.837668] isapnp: No Plug & Play device found
[ 72.408296] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 72.409082] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 72.411018] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 72.418333] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 72.421333] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 72.424216] mice: PS/2 mouse device common for all mice
[ 72.431934] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 72.433319] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 72.433425] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 72.435148] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 72.435241] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 72.438136] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 72.438312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 72.440251] EISA: Probing bus 0 at eisa.0
[ 72.440403] Cannot allocate resource for EISA slot 6
[ 72.440469] Cannot allocate resource for EISA slot 7
[ 72.440540] EISA: Detected 0 cards.
[ 72.441240] TCP bic registered
[ 72.441382] NET: Registered protocol family 1
[ 72.441491] NET: Registered protocol family 8
[ 72.441556] NET: Registered protocol family 20
[ 72.441831] Using IPI Shortcut mode
[ 72.447057] Freeing unused kernel memory: 288k freed
[ 72.747683] input: AT Translated Set 2 keyboard as /class/input/input0
[ 73.095803] Capability LSM initialized
[ 79.266348] PIIX3: IDE controller at PCI slot 0000:00:07.1
[ 79.266550] PIIX3: chipset revision 0
[ 79.266613] PIIX3: not 100% native mode: will probe irqs later
[ 79.266721] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
[ 79.266914] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[ 79.267099] Probing IDE interface ide0...
[ 79.553910] hda: ST32122A, ATA DISK drive
[ 80.226417] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 80.228326] Probing IDE interface ide1...
[ 80.961516] hdc: Pioneer CD-ROM ATAPI Model DR-A04S 0102, ATAPI CD/DVD-ROM drive
[ 81.297667] ide1 at 0x170-0x177,0x376 on irq 15
[ 81.392978] hda: max request size: 128KiB
[ 81.393101] hda: 4124736 sectors (2111 MB) w/128KiB Cache, CHS=4092/16/63, (U)DMA
[ 81.393376] hda: cache flushes not supported
[ 81.393783] hda: hda1
[ 81.477471] hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
[ 81.477788] Uniform CD-ROM driver Revision: 3.20
[ 82.408663] IT8212: IDE controller at PCI slot 0000:00:0e.0
[ 82.408865] IT8212: chipset revision 17
[ 82.408932] it821x: controller in smart mode.
[ 82.409068] IT8212: 100% native mode on irq 12
[ 82.409180] ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio
[ 82.409392] ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:pio
[ 82.409585] Probing IDE interface ide2...
[ 82.697006] hde: SAMSUNG SV0644A, ATA DISK drive
[ 82.976917] hdf: QUANTUM FIREBALL ST6.4A, ATA DISK drive
[ 83.037495] hde: Performing identify fixups.
[ 83.037570] hdf: Performing identify fixups.
[ 83.037824] ide2 at 0x6400-0x6407,0x6802 on irq 12
[ 83.039807] hde: max request size: 128KiB
[ 83.039903] hde: 12504240 sectors (6402 MB) w/490KiB Cache, CHS=13232/15/63, BUG
[ 83.040422] hde:hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 83.041403] hde: recal_intr: error=0x04 { DriveStatusError }
[ 83.041566] ide: failed opcode was: unknown
[ 84.191656] hde1
[ 84.196329] hdf: max request size: 128KiB
[ 84.196430] hdf: 12594960 sectors (6448 MB) w/81KiB Cache, CHS=13328/15/63, BUG
[ 84.196963] hdf:hdf: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 84.197944] hdf: recal_intr: error=0x04 { DriveStatusError }
[ 84.198105] ide: failed opcode was: unknown
[ 85.364192] hdf1 hdf2
[ 85.387003] Probing IDE interface ide3...
[ 85.672171] hdg: FUJITSU MPC3064AT, ATA DISK drive
[ 85.952082] hdh: FUJITSU MPC3064AT, ATA DISK drive
[ 86.008864] hdg: Performing identify fixups.
[ 86.008938] hdh: Performing identify fixups.
[ 86.009230] ide3 at 0x6c00-0x6c07,0x7002 on irq 12
[ 86.011181] hdg: max request size: 128KiB
[ 86.011278] hdg: 12672450 sectors (6488 MB), CHS=13410/15/63, BUG
[ 86.011695] hdg:hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 86.012685] hdg: recal_intr: error=0x04 { DriveStatusError }
[ 86.012846] ide: failed opcode was: unknown
[ 87.172242] hdg1 hdg2
[ 87.204345] hdh: max request size: 128KiB
[ 87.204451] hdh: 12672450 sectors (6488 MB), CHS=13410/15/63, BUG
[ 87.204866] hdh:hdh: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 87.205850] hdh: recal_intr: error=0x04 { DriveStatusError }
[ 87.206010] ide: failed opcode was: unknown
[ 88.363043] hdh1 hdh2
[ 90.843511] raid5: measuring checksumming speed
[ 90.862642] 8regs : 455.000 MB/sec
[ 90.882632] 8regs_prefetch: 367.000 MB/sec
[ 90.902624] 32regs : 292.000 MB/sec
[ 90.922628] 32regs_prefetch: 249.000 MB/sec
[ 90.942608] pII_mmx : 717.000 MB/sec
[ 90.962605] p5_mmx : 688.000 MB/sec
[ 90.962672] raid5: using function: pII_mmx (717.000 MB/sec)
[ 90.992816] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 90.992927] md: bitmap version 4.39
[ 91.011783] md: raid5 personality registered for level 5
[ 91.011891] md: raid4 personality registered for level 4
[ 93.978083] md: md0 stopped.
[ 94.072974] md: bind
[ 94.074803] md: bind
[ 94.076631] md: bind
[ 94.077848] md: bind
[ 94.147753] raid5: device hde1 operational as raid disk 0
[ 94.147858] raid5: device hdh1 operational as raid disk 3
[ 94.147928] raid5: device hdg1 operational as raid disk 2
[ 94.147997] raid5: device hdf1 operational as raid disk 1
[ 94.153370] raid5: allocated 4203kB for md0
[ 94.153488] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[ 94.153559] RAID5 conf printout:
[ 94.153620] --- rd:4 wd:4 fd:0
[ 94.153686] disk 0, o:1, dev:hde1
[ 94.153804] disk 1, o:1, dev:hdf1
[ 94.153871] disk 2, o:1, dev:hdg1
[ 94.153936] disk 3, o:1, dev:hdh1
[ 96.522571] kjournald starting. Commit interval 5 seconds
[ 96.522787] EXT3-fs: mounted filesystem with ordered data mode.
[ 124.322708] Real Time Clock Driver v1.12ac
[ 124.391793] input: PC Speaker as /class/input/input1
[ 125.593411] Floppy drive(s): fd0 is 1.44M
[ 125.613055] FDC 0 is a post-1991 82077
[ 126.388229] parport: PnPBIOS parport detected.
[ 126.388500] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 131.779991] lp0: using parport0 (interrupt-driven).
[ 132.000409] ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
[ 132.000434] Last modified Nov 1, 2000 by Paul Gortmaker
[ 132.000602] NE*000 ethercard probe at 0x300: 00 c0 a8 08 09 7f
[ 132.000969] eth%d: NE2000 found at 0x300, using IRQ 9.
[ 132.599030] SCSI subsystem initialized
[ 132.747469] Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 10, DMA priority 5
[ 132.748686] scsi0 : Adaptec 1542
[ 132.759708] isa bounce pool size: 16 pages
[ 133.705394] NET: Registered protocol family 10
[ 133.706295] lo: Disabled Privacy Extensions
[ 133.707690] IPv6 over IPv4 tunneling driver
[ 134.186692] Adding 45352k swap on /dev/hdf2. Priority:-1 extents:1 across:45352k
[ 134.192219] Adding 84096k swap on /dev/hdg2. Priority:-2 extents:1 across:84096k
[ 134.204289] Adding 84096k swap on /dev/hdh2. Priority:-3 extents:1 across:84096k
[ 134.694560] EXT3 FS on hda1, internal journal
[ 136.657867] kjournald starting. Commit interval 5 seconds
[ 136.661934] EXT3 FS on md0, internal journal
[ 136.661985] EXT3-fs: mounted filesystem with ordered data mode.
[ 143.931785] eth0: no IPv6 routers present
I am slightly concerned about the initialisation errors on the RAID drives. They seem to be working fine. I thought it might be because I was using plain old IDE cables, but I've replaced them with 80-core UltraIDE cables: no difference. Odd. I've only seen this before on failing drives, but these errors are one-offs, only happening at startup. Otherwise, it seems fine.
Still, for the nonce, this is only a test box. It's not doing anything really important. So I am not too concerned...
For the curious:
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 128MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 32768
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 28672 pages, LIFO batch:7
[17179569.184000] DMI not present or invalid.
[17179569.184000] ACPI: Unable to locate RSDP
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro vga=8
[17179569.184000] No local APIC present or hardware disabled
[17179569.184000] mapped APIC to ffffd000 (01101000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 334.139 MHz processor.
[ 68.089353] Using tsc for high-res timesource
[ 68.094542] Console: colour VGA+ 132x43
[ 68.096761] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 68.098689] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 68.134624] Memory: 120600k/131072k available (1829k kernel code, 9976k reserved, 1038k data, 288k init, 0k highmem)
[ 68.134717] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 68.212975] Calibrating delay using timer specific routine.. 669.13 BogoMIPS (lpj=1338277)
[ 68.213421] Security Framework v1.0.0 initialized
[ 68.213520] SELinux: Disabled at boot.
[ 68.213679] Mount-cache hash table entries: 512
[ 68.214913] CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
[ 68.214967] CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
[ 68.215164] Enabling new style K6 write allocation for 128 Mb
[ 68.215248] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
[ 68.215309] CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000
[ 68.215429] CPU: AMD-K6(tm) 3D processor stepping 0c
[ 68.215576] Checking 'hlt' instruction... OK.
[ 68.229122] SMP alternatives: switching to UP code
[ 68.229177] Freeing SMP alternatives: 0k freed
[ 68.230197] checking if image is initramfs... it is
[ 71.324006] Freeing initrd memory: 5264k freed
[ 71.327420] NET: Registered protocol family 16
[ 71.327785] EISA bus registered
[ 71.345592] PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=0
[ 71.345676] PCI: Using configuration type 1
[ 71.345726] Setting up standard PCI resources
[ 71.376374] ACPI: Interpreter disabled.
[ 71.376484] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 71.376607] pnp: PnP ACPI: disabled
[ 71.376677] PnPBIOS: Scanning system for PnP BIOS support...
[ 71.377541] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc320
[ 71.377629] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc348, dseg 0xf0000
[ 71.385976] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[ 71.386535] PCI: Probing PCI hardware
[ 71.386622] PCI: Probing PCI hardware (bus 00)
[ 71.387533] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
[ 71.387701] Boot video device is 0000:00:0d.0
[ 71.434225] NET: Registered protocol family 2
[ 71.468583] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 71.469692] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 71.470033] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 71.470218] TCP: Hash tables configured (established 4096 bind 2048)
[ 71.470293] TCP reno registered
[ 71.478087] audit: initializing netlink socket (disabled)
[ 71.478263] audit(1165968912.572:1): initialized
[ 71.479598] VFS: Disk quotas dquot_6.5.1
[ 71.479887] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 71.480607] Initializing Cryptographic API
[ 71.480723] io scheduler noop registered
[ 71.480897] io scheduler anticipatory registered
[ 71.481016] io scheduler deadline registered
[ 71.481164] io scheduler cfq registered (default)
[ 71.481304] Limiting direct PCI/PCI transfers.
[ 71.481381] Activating ISA DMA hang workarounds.
[ 71.483287] isapnp: Scanning for PnP cards...
[ 71.837668] isapnp: No Plug & Play device found
[ 72.408296] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 72.409082] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 72.411018] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 72.418333] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 72.421333] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 72.424216] mice: PS/2 mouse device common for all mice
[ 72.431934] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 72.433319] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 72.433425] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 72.435148] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 72.435241] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 72.438136] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 72.438312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 72.440251] EISA: Probing bus 0 at eisa.0
[ 72.440403] Cannot allocate resource for EISA slot 6
[ 72.440469] Cannot allocate resource for EISA slot 7
[ 72.440540] EISA: Detected 0 cards.
[ 72.441240] TCP bic registered
[ 72.441382] NET: Registered protocol family 1
[ 72.441491] NET: Registered protocol family 8
[ 72.441556] NET: Registered protocol family 20
[ 72.441831] Using IPI Shortcut mode
[ 72.447057] Freeing unused kernel memory: 288k freed
[ 72.747683] input: AT Translated Set 2 keyboard as /class/input/input0
[ 73.095803] Capability LSM initialized
[ 79.266348] PIIX3: IDE controller at PCI slot 0000:00:07.1
[ 79.266550] PIIX3: chipset revision 0
[ 79.266613] PIIX3: not 100% native mode: will probe irqs later
[ 79.266721] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
[ 79.266914] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[ 79.267099] Probing IDE interface ide0...
[ 79.553910] hda: ST32122A, ATA DISK drive
[ 80.226417] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 80.228326] Probing IDE interface ide1...
[ 80.961516] hdc: Pioneer CD-ROM ATAPI Model DR-A04S 0102, ATAPI CD/DVD-ROM drive
[ 81.297667] ide1 at 0x170-0x177,0x376 on irq 15
[ 81.392978] hda: max request size: 128KiB
[ 81.393101] hda: 4124736 sectors (2111 MB) w/128KiB Cache, CHS=4092/16/63, (U)DMA
[ 81.393376] hda: cache flushes not supported
[ 81.393783] hda: hda1
[ 81.477471] hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
[ 81.477788] Uniform CD-ROM driver Revision: 3.20
[ 82.408663] IT8212: IDE controller at PCI slot 0000:00:0e.0
[ 82.408865] IT8212: chipset revision 17
[ 82.408932] it821x: controller in smart mode.
[ 82.409068] IT8212: 100% native mode on irq 12
[ 82.409180] ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio
[ 82.409392] ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:pio
[ 82.409585] Probing IDE interface ide2...
[ 82.697006] hde: SAMSUNG SV0644A, ATA DISK drive
[ 82.976917] hdf: QUANTUM FIREBALL ST6.4A, ATA DISK drive
[ 83.037495] hde: Performing identify fixups.
[ 83.037570] hdf: Performing identify fixups.
[ 83.037824] ide2 at 0x6400-0x6407,0x6802 on irq 12
[ 83.039807] hde: max request size: 128KiB
[ 83.039903] hde: 12504240 sectors (6402 MB) w/490KiB Cache, CHS=13232/15/63, BUG
[ 83.040422] hde:hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 83.041403] hde: recal_intr: error=0x04 { DriveStatusError }
[ 83.041566] ide: failed opcode was: unknown
[ 84.191656] hde1
[ 84.196329] hdf: max request size: 128KiB
[ 84.196430] hdf: 12594960 sectors (6448 MB) w/81KiB Cache, CHS=13328/15/63, BUG
[ 84.196963] hdf:hdf: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 84.197944] hdf: recal_intr: error=0x04 { DriveStatusError }
[ 84.198105] ide: failed opcode was: unknown
[ 85.364192] hdf1 hdf2
[ 85.387003] Probing IDE interface ide3...
[ 85.672171] hdg: FUJITSU MPC3064AT, ATA DISK drive
[ 85.952082] hdh: FUJITSU MPC3064AT, ATA DISK drive
[ 86.008864] hdg: Performing identify fixups.
[ 86.008938] hdh: Performing identify fixups.
[ 86.009230] ide3 at 0x6c00-0x6c07,0x7002 on irq 12
[ 86.011181] hdg: max request size: 128KiB
[ 86.011278] hdg: 12672450 sectors (6488 MB), CHS=13410/15/63, BUG
[ 86.011695] hdg:hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 86.012685] hdg: recal_intr: error=0x04 { DriveStatusError }
[ 86.012846] ide: failed opcode was: unknown
[ 87.172242] hdg1 hdg2
[ 87.204345] hdh: max request size: 128KiB
[ 87.204451] hdh: 12672450 sectors (6488 MB), CHS=13410/15/63, BUG
[ 87.204866] hdh:hdh: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 87.205850] hdh: recal_intr: error=0x04 { DriveStatusError }
[ 87.206010] ide: failed opcode was: unknown
[ 88.363043] hdh1 hdh2
[ 90.843511] raid5: measuring checksumming speed
[ 90.862642] 8regs : 455.000 MB/sec
[ 90.882632] 8regs_prefetch: 367.000 MB/sec
[ 90.902624] 32regs : 292.000 MB/sec
[ 90.922628] 32regs_prefetch: 249.000 MB/sec
[ 90.942608] pII_mmx : 717.000 MB/sec
[ 90.962605] p5_mmx : 688.000 MB/sec
[ 90.962672] raid5: using function: pII_mmx (717.000 MB/sec)
[ 90.992816] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 90.992927] md: bitmap version 4.39
[ 91.011783] md: raid5 personality registered for level 5
[ 91.011891] md: raid4 personality registered for level 4
[ 93.978083] md: md0 stopped.
[ 94.072974] md: bind
[ 94.074803] md: bind
[ 94.076631] md: bind
[ 94.077848] md: bind
[ 94.147753] raid5: device hde1 operational as raid disk 0
[ 94.147858] raid5: device hdh1 operational as raid disk 3
[ 94.147928] raid5: device hdg1 operational as raid disk 2
[ 94.147997] raid5: device hdf1 operational as raid disk 1
[ 94.153370] raid5: allocated 4203kB for md0
[ 94.153488] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[ 94.153559] RAID5 conf printout:
[ 94.153620] --- rd:4 wd:4 fd:0
[ 94.153686] disk 0, o:1, dev:hde1
[ 94.153804] disk 1, o:1, dev:hdf1
[ 94.153871] disk 2, o:1, dev:hdg1
[ 94.153936] disk 3, o:1, dev:hdh1
[ 96.522571] kjournald starting. Commit interval 5 seconds
[ 96.522787] EXT3-fs: mounted filesystem with ordered data mode.
[ 124.322708] Real Time Clock Driver v1.12ac
[ 124.391793] input: PC Speaker as /class/input/input1
[ 125.593411] Floppy drive(s): fd0 is 1.44M
[ 125.613055] FDC 0 is a post-1991 82077
[ 126.388229] parport: PnPBIOS parport detected.
[ 126.388500] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 131.779991] lp0: using parport0 (interrupt-driven).
[ 132.000409] ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
[ 132.000434] Last modified Nov 1, 2000 by Paul Gortmaker
[ 132.000602] NE*000 ethercard probe at 0x300: 00 c0 a8 08 09 7f
[ 132.000969] eth%d: NE2000 found at 0x300, using IRQ 9.
[ 132.599030] SCSI subsystem initialized
[ 132.747469] Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 10, DMA priority 5
[ 132.748686] scsi0 : Adaptec 1542
[ 132.759708] isa bounce pool size: 16 pages
[ 133.705394] NET: Registered protocol family 10
[ 133.706295] lo: Disabled Privacy Extensions
[ 133.707690] IPv6 over IPv4 tunneling driver
[ 134.186692] Adding 45352k swap on /dev/hdf2. Priority:-1 extents:1 across:45352k
[ 134.192219] Adding 84096k swap on /dev/hdg2. Priority:-2 extents:1 across:84096k
[ 134.204289] Adding 84096k swap on /dev/hdh2. Priority:-3 extents:1 across:84096k
[ 134.694560] EXT3 FS on hda1, internal journal
[ 136.657867] kjournald starting. Commit interval 5 seconds
[ 136.661934] EXT3 FS on md0, internal journal
[ 136.661985] EXT3-fs: mounted filesystem with ordered data mode.
[ 143.931785] eth0: no IPv6 routers present
I am slightly concerned about the initialisation errors on the RAID drives. They seem to be working fine. I thought it might be because I was using plain old IDE cables, but I've replaced them with 80-core UltraIDE cables: no difference. Odd. I've only seen this before on failing drives, but these errors are one-offs, only happening at startup. Otherwise, it seems fine.
Still, for the nonce, this is only a test box. It's not doing anything really important. So I am not too concerned...